There are different grade for hex bolts, such as 4.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9, etc. Among them, the hexagonal bolts of grade 8.8 and above are made of low-carbon alloy steel or medium-carbon steel. It reaches different grade after heat treatme
·Size: 2†to 48â€Â·Class: 150LB to 2500LB·Features: Bolted bonnet or pressure seal bonnet, outside screw and yoke, rising stem, solid wedge or flexible Wedge, threaded or welded seat ring
De-floating Detergent DX-7 can effectively remove the floating color during the dyeing process, as well as the stains and oil stains on the fiber or fabric, and improve the color fastness.
Part No. : CJWP27-AA03A1Free flow: ~600ml/min under DC 3V, and spec can be customized by adjust the motor and pump head.Max pressure: >280KPa,Working current: <500mA.Application: High-end medical equipment, Coffee maker, Water dispenser, Water circulating
Part No.: CJWP08-AB03A1Free flow: ~32ml/min under DC 3.3V, and spec can be customized by adjust the motor and pump head.Max pressure: >80KPaWorking current: ≤120mA.Application: High-end Medical equipment, Clean appliances, Health care equipment, Household
As the resonant system is reactive power full compensated, the power of the equipment and power source is only less than 1/10 of measured equipment; with smaller volume and lighter weight compared with the equipment in same capacity.
Our wide tolerance stepped couplings are designed to connect pipes with different diameters. The stepped coupling is suitable for steel, PVC, ductile iron, asbestos cement, FRP, cast iron, and concrete pipes.
With characteristic of high compressive strength and good toughness, high density white fused alumina could be used for high grade cutting wheels and ceramic grinding wheel, it could increase the products’ life and improve products’ performance.
Diagonal Cutting Pliers are mainly used to shear wires and lead wires of components and parts. They are also commonly used to replace shears to shear insulation sleeve and nylon tie wire card. The teeth of the diagonal cutting pliers can also be used to t
Special Step Seals for Pistons GSD for reciprocated hydraulic system. GSD is a single-acting piston compact seal, consisting of a dynamic teflon seal and a standard O-ring with static low permanent deformation.