This pvc pipe cutting tool has a plastic button which is different from other self-rebounding cutters.The user simply slides the button to the left to adjust the cutter opening to the maximum.

Product Specification

1. Use method: according to the cut pipe diameter to choose the appropriate specifications of the pipe cutter, so as to avoid the * small distance between the blade and the roller is less than the small cut pipe size of the specification cutter, resulting in the slider from the main body guide; check whether the cutter, force screw, cutter frame support wheel and other parts are intact; will be cut pipe fittings with pipe pressure clamp firmly, cut blade and roller and pipe vertical, to prevent the cut blade knife edge burst; will be cut pipe fittings Scribe a good line according to the required length, loosen the knife mouth, jam the cutting knife on the pipe, so that the knife blade is aligned with the scribed line, while using the force screw to gradually enter the knife.

2. Attention: each time into the knife force should not be too violent, into the knife depth each time not more than the screw half turn appropriate, the first cut into the knife can be slightly larger, in order to cut a deeper knife groove; when use the pipe cutter each active part and the surface of the cut pipe we can add a small amount of lubricant to reduce friction.

Product Properties

1.Ratchet Wheel

2.Labor-saving

3.Rubber covered non-slip handle

4.SK5 blade,HRC53°，surface electroplate

Application

Packing and Transportation

Strategic Partners with Chenghong Commerce

2000 customers from more than 30 countries in the past 16 years.

http://www.dajingtools.com/