Grinding ball and grinding cylpebs are grinding media of the grinding machine. Their main function is to grind the material in the grinding machine to meet the use standard. Put an appropriate amount of material and grinding media into the grinding machin
Cornstarch products are biodegradable, environmentally friendly and affordable. The LB-81 clamshell is an 8-inch square box with a simple and elegant appearance.
1. Mould material: S50C, P20H, 718H, 2738, S136 and etc.2. Cavity no.: single or 1+13. System of runner: hot runner, cold runner4. Ejection type: ejection pin, air gate, hydro cylinder5. Term of mould production: 50days---60days
The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the strain pole, which apply to aerial line below 220kV.
Specialize in producing aftermarket Harley exhaust over 7 years. Cut 1/2 cost off. Still give you advanced mufflers with stepped baffles design that produces noticeable horsepower increases.
This Pipe Tangent Bend is a bend that is bent at an angle to a desired angle after the tube is heated. This heating process can produce large diameter bends.
Description: GLYCOL WATER CHILLER is a refrigeration apparatus that produces water/glycol mix, to cool industrial process equipment. A low temperature water chiller uses the evaporation of a refrigerant to cool the fluid through a heat exchanger. The flui
Professional production: manifolds, mixing water valves, temperature control valves, radiator valves, air vent valves, ball valves, flow meter and boiler accessories, products through the CE authentication.
SLS technology melts the special additives into the binder by laser irradiation of the material powder. Using a high power laser to scan the powder to melts the special additives of material powders to achieve the function of binder.
ELECMAN® Electrical metallic tubing (EMT), also commonly called thin-wall, is a listed steel raceway of circular cross section, which is unthreaded, and nominally 10' (3050mm)long.