A refractory alloy consisting of chromium-based alloys with other elements. Compared with nickel, chromium has higher melting point (1860℃), higher specific strength (ratio of strength to density)
Mild steel has a carbon content of 0.04-0.3% and is the most common grade of carbon steel. Mild steel is also considered mild steel as it is defined as having a low carbon content of 0.05-0.25%. Mild steel is ductile, highly malleable and can be used in a
Material grade: Gr5, GR6, GR7, GR9, GR12Technology: Cold rolling, hot rollingThickness: GR7 can do 0.3mm thickness; Gr12 can do 0.5mm thickness, gr5, gr6 can do 0.8mm thickness
Due to competitive price of stainless steel of 201 and good surface of after-polishing, so our 201 Polished Stainless Steel Strip is widely used in decorative application.
The Aluminium Window Frame Profiles are made from 6000 series aluminum alloy. It can also change the nature of the product by adding different elements. Adding a small amount of copper or zinc can increase the strength of the alloy without significantly r
Silica brick is made of silicon as raw material with high temp firing ,which silicon oxide is above93%, used in hot blast furnace,coke oven,glass kiln,these brick have good volume stability at high temperature, high refractoriness under the load,small rat
An aluminum alloy foil is provided that is used as a material of a container and that achieves desired heat-resistant properties, enabling the container to withstand repeated use.
Stainless steel sheet is typically sold in the annealed condition and is available in most grades. Our stainless steel sheets come in both a standard 2B finish and various polished finishes.
The slabs are heated in a natural gas fired furnace before processing it through a hot rolling mill. This process reduces the thickness. Once it is cooled, the plate is cut into desired length and the coil is further processed through the cold rolling mil